Food-grade stainless steel and FDA-compliant polymers
4. Electrical Specifications
Power Supply
230V AC, single phase, 60 Hz
Maximum Amperage
15 A
Energy per 220 lb of Ice
13.1 kWh
Maximum Daily Energy Consumption
49.9 kWh (at peak production, 104 F ambient)
Circuit Breaker (recommended)
20 A dedicated circuit
Power Connection
Hardwired or NEMA 6-20P plug (consult installer)
5. Water Supply Requirements
Water Consumption
5.9 gal/h (22.3 L/h) at peak production
Supply Pressure
14 -- 70 psi (1 -- 5 bar)
Inlet Water Temperature
41 -- 95 F (5 -- 35 C)
Connection Type
3/4 in NPT male fitting, braided stainless supply line recommended
Drain
1 in gravity drain or condensate pump (site-dependent)
Water Quality
Potable municipal water; filtration system included
6. Operating Conditions
Ambient Air Temperature
50 -- 104 F (10 -- 40 C)
Inlet Water Temperature
41 -- 95 F (5 -- 35 C)
Relative Humidity
Up to 90% non-condensing
Installation Environment
Outdoor, unattended, continuous 24/7 operation
Wind Resistance
Rated for sustained winds up to 60 mph when properly anchored
Surface Requirement
Level concrete pad, minimum 4 in thickness
7. Maintenance Zones and Clearances
Figure 9: Top View -- Maintenance Clearance ZonesFigure 10: Front View -- Maintenance Access Zones
Left Clearance
16.3 in (414 mm) minimum
Right Clearance
16.3 in (414 mm) minimum
Top Clearance
42.6 in (1082 mm) minimum
Front Clearance
40.5 in (1029 mm) minimum
Rear Clearance
3.9 in (100 mm) minimum
All maintenance operations -- including ice machine servicing, filter replacement, payment terminal access, and electrical panel inspection -- are performed from the front and sides of the unit. The rear clearance of 3.9 in is required solely for ventilation and condensate drainage. Left and right clearances of 16.3 in each allow full panel removal for access to internal components. The top clearance of 42.6 in accommodates the upper panel lift required during ice machine extraction or replacement. The front clearance of 40.5 in provides the working space necessary for a technician to perform routine and corrective maintenance safely. All clearance dimensions must be maintained free of obstructions at all times.
8. Interface and Payment
Payment Terminal
PAX IM30 (integrated, PCI PTS 6.x compliant)
Payment Methods
Contactless NFC (Apple Pay, Google Pay), chip (EMV), magnetic stripe, credit/debit cards
7 in color LCD -- product selection, pricing, transaction status
Receipt
Digital receipt via email or SMS (no paper printer)
ADA Compliance
Controls and hatch positioned per ADA reach-range guidelines
9. Connectivity
Network Interfaces
RJ45 Ethernet, 4G LTE, 5G-ready, WiFi 802.11ac
Monitoring Platform
Kiosk'Ice Business (cloud-based SaaS dashboard)
Alerts
Real-time notifications: equipment faults, low ice, door open, payment errors
OTA Updates
Remote firmware and software updates via secure channel (TLS 1.3)
Telemetry
Ice level, production rate, ambient/internal temperatures, energy consumption, transaction logs
API Integration
REST API available for third-party fleet management systems
10. Certifications and Compliance
The Kiosk'Ice US model is specifically adapted for the American market. The unit is engineered to comply with applicable US electrical standards (UL/CSA), food safety regulations (FDA 21 CFR, NSF/ANSI standards for commercial ice equipment), and commercial vending equipment requirements. The payment system meets PCI DSS and PCI PTS certification requirements for unattended payment terminals. Electrical components are rated for 230V/60Hz operation per NEC guidelines. Contact the manufacturer directly at [email protected] for the current and complete list of certifications, test reports, and compliance documentation applicable to your state and jurisdiction.
